| || |
JBJ 28 Gallon Nano Cube HQI With 150 Watt HQI Metal Halide
The JBJ 28 Gallon Nano Cube HQI Aquarium incorporates many high-tech features not commonly found in "All-In-One" systems. The new concept behind the 28 Gallon Nano Cube HQI was inspired by hundreds of reef hobbyists who requested higher powered lighting, protein skimming, increased water circulation, a more simplified filter, and designated water level columns in the rear chambers for heaters, refugiums and protein skimmers heater, protein skimmer & refugium not included).
28 Gallon Nano Cube HQI General Specifications:
Tank Volume: 28 gallons
Glass Thickness: 6mm
Dimensions: 18" X 22" X 22"
150W HQI/14K Light with German parabolic reflector. Enough light for hard corals & clams.
Four Nite-Vu LEDs with separate power cord. One LED located in each corner. LEDs plug in for easy replacement.
Pump & Filtration Features:
Water is directed into a 3-Stage filter media basket, which comes installed with a mechanical sponge, chemical activated carbon and biological ceramic rings. The 3-Stage filter media basket can host a variety of chemical medias to suit your needs. Cleaning is especially easy since all you have to do is lift up on the basket handle and watch the water drain out the bottom for a simple and dry filter change. All baskets have a sliding door for added convenience.
Once the water leaves the filter basket water is split to the designated heater column (heater not included) to the left and the counter current, air-driven protein skimmer to the right. The area that contains the heater, protein skimmer and 3-Stage Filter media basket always has a constant water level.
Once the water is heated and skimmed, the water overflows into the pump water columns. Water is directed back into the main body of the aquarium via (2) UL-Listed Accela Pumps rated at 266gph at a low energy draw of 16W. The Nano Cube HQI also includes the Ocean Pulse Duo Wavemaker, which creates turbulent currents for a more natural reef environment. Your wavemaker can be set from 10 seconds to 6 minute alternating cycles. Water is returned via (2) directional return nozzles on each side of the center overflow for even natural currents.
Four Integrated cooling fans (3000rpm`s) will keep the canopy cool. The fans are on two separate circuits in case one of the fans fail. If all the fans fail a thermal protector will automatically shut off the HQI lighting system until temperatures reach safe conditions.
Flame retardant ABS canopy housing
Feeding lid for easy access for feeding and to retrieve water samples without lifting the entire hood.
You May Also Be Interested In: